Pave-or-Tile® is the innovative solution for all exterior flooring. Pave-or-Tile® is a 20mm thick porcelain tile design
specially for outdoor applications, and an ideal choice for patios, pathways, stepping stones, step and swimming pool surrounds.
Porcelain’s natural properties ensures fantastic stain resistance, low maintenance, frost resistance, slip resistant, high strength
and is also much lighter than its stone / concrete based alternatives. We three adaptive installation methods available,
Pave-or-Tile® really is a versatile product

 

Key Features

 

  • Stain Resistant
  • Slip Resistant P5 Rating
  • Light Weight
  • High Strength
  • Low Maintenance 
  •  Can lay on Road base & Sand

Installation

Please be advised that the provided resources are to be used as a guide / tips only. You should consult relevant Australian Standards and consult with a licensed contractor. Please understand that installation may vary depending on site conditions. These guides are provided in good faith and do not replace the services of licensed contractors.


On Road Base and Sand                                                                               

Step1. Excavate to area to be paved by at least 120mm below the desired height of finished tile. (This amount may change depending on site conditions application)
Step 2. Spread road base and compact with plate compactor to a depth of no less than 75mm. Ensure fall gradient of at least 2:100.
Step3. Spread the coarse river sand to a depth of 25mm. Use screed and screed rail to ensure a level finish.
Step4. Set string lines at right angles to ensure that the joint lines are straight and square.
Step5. Begin to lay tiles, using string line as a guide. Ensure to leave a 3-5mm gap for joints. (Hint: use tile spacers to ensure consistency) 
Step6. Cut tiles with diamond blade saw as needed
Step7. Fill the joints. Use a polymer joint filling sand. Sweep sand in multiple directions until all joints are filled. Hose of when complete, ensuring not to wash sand out of the joints




On Pedestals                                                                                    

Step1. Prepare the concrete foundation to required specifiaction. Ensure there is sufficient fall on existing slab
Step2. Set string lines to ensure joint lines are straight and square 
Step3. Begin laying tiles on the pedestals. Adjust pedestals as required to keep a level surface with a slope of at least 1:100.
Ensure tiles are tight and free from movement. We suggest a 3mm joint spacer should be used.
Step 4. Ensure all edges are securely restrained. 
Note: We recommend to seek professional advice if laying tiles in this method. Pedestal height should be under 100mm.    
Be aware tiles may break and collapse if a heavy object falls from a height onto them.  



Using Tile Adhesive                                                                                        

Step1. Prepare the concrete foundation to required specifiaction. Ensure there is sufficient fall on existing slab. Ensure slab has been cleaned and free from any dirt or grease.    
Step2. Set string lines to ensure joint lines are straight and square
Step 3. Use a high-quality tile adhesive. It should be flexible and suitable for exterior use. Allow for expansion joints as per Australian Standards.   
Step 4. Use a 12mm notched trowel to apply adhesive to concrete foundation.
Step 5. Lay tiles using a 3-5mm joint spacing.
Step6. Grout tiles when compete ensuring to thoroughly remove all excess grout before drying                                                                                               

                                                                                               

Note: Use should engage a professional tile when installing using this method                  

Write a review

Note: HTML is not translated!
    Bad           Good

m2 Calculator:



Pave-or-Tile 600x600x20mm

  • Weight: 16.00kg
  • Dimensions (LxWxH): 600mm x 600mm x 20mm
  • RRP m2 Price: $49.95 $44.95
  • Qty per Pallet: 72
  • Suitable: Pools,Pedestrians,Patios,Courtyards
  • Product Code: N6798
  • Availability: In Stock
  • $18.03
  • $16.23 each


Available Options

Please note - Whilst all care has been taken to provide you with a good indication of colour, you should always sight product samples before use. Due to natural variations in Clay / Concrete and Stone products, Colours & Sizes may vary. Products may vary from image provided.